Terex Finlay Hydrasander

Terex Finlay 150E :
The Terex Finlay 150E Hydrasander is used for dewatering and removing the silt content from washed sand.
The large diameter bucket wheel and low power requirements enables these units to be both efficient and cost-effective.

Terex Finlay 150TP :
The Terex Finlay 150TP Hydrasander provides two sand products from one unit.

Terex Finlay 200E :
The Terex Finlay 200E is ideal for dewatering and removing the silt content from washed sand.
The large diameter bucket wheel and low power requirements enables these units to be both efficient and cost-effective.

Terex Finlay 252E :
The Terex Finlay 252E Hydrasander is a specialist model for sand classification. 
The system consists of three recovery spirals with variable speed and direction control.

For more information about our washing range you can contact us at  +32 (0) 50/55.18.90

Technical  specifications :

TYPE	WEIGHT	CAPACITIES   (depending applic.)	POWER	BUCKET MESH APERTURE	WATER REQUIREMENTS
150E	7.5T	60-120 T./ per hour	7,5kW Elec./ Hydraulic	10x5mm	1820-3640 Lt /min.
150TP	9 T	tot 120 T./ per hour	11kW Electric	12x6mm coarse 10x5mm fines	tot 4540 Lt /min.
200E	11T	100-200 T./ per hour	7,5kW Elec./ Hydraulic	10x5mm	2270-4540 Lt /min.
252E	12.5T	100-200 T./ per hour	2x  7,5kW Elec./ Hydraulic	10x5mm primary 8x4mm secundary	2270-4540 Lt /min.